ADILON INDIFIX

Add Your Heading Text Here

ADILON INDIFIX is advanced wet rub fastness improver for cellulosic and blends providing enhanced fastness properties previously unattainable without the use of harmful chemistry and negative influence on the fabrics natural ascetics. It improves the wet rubbing fastness of dyeing and prints with reactive dyes on cellulosic fibers.

Characteristics
Benefits
Efficiency as a permanent rubbing fastness improver especially if a curing step has been performed

Soft hand feeling, no influence on light fastness.

Easy operation for using by direct dilution

It is formaldehyde – , diethyl formamide – , butanone oxime free, conforms to OEKO –TEX 100 Standard.

Very good fixing property on denim

Can be applied after desizing and Before or after stone/enzyme wash.

Properties:

CHEMICAL CONSTITUENTS

Special polymer.

CHEMICAL NATURE

Weakly cationic.

COLOUR

Pale yellow to dark yellow clear liquid.

pH. (as such)

6 +/- 1

DENSITY
Approx. 1.0 g/cm3
SOLUBILITY

Soluble in water.

COMPATIBILITY​

Compatible with cationic and non-ionic products.

ECOLOGY AND TOXICITY

The usual hygiene and safety rules for handling chemicals should be observed in storage, handling and use. The product must not be swallowed.

Application:

Based on different kind and concentration of dyes, different kind and pattern oftreated fabric, dosage as below:

  • Dipping (washing only):
    ADILON INDIFIX : 2 – 4% (O.W.F) (Adjustment base on color)
    Bath ratio : 1:10–20
    Dyed fabric (pH<=7) dip for30mins dry & cure at 160 ̊C for 2mins.
  • Padding:
    ADILON INDIFIX : 30 – 50 g/L
    Dyed fabrics (pH <= 7) → one dip & pad with water retention 80 – 85% → dry & cure at 160 ̊C for 2min.
  • Exhaust:
    ADILON INDIFIX : 30 – 50 g/L
    Dyed fabrics (pH <= 7) → one dip & pad with water retention 80 – 85% → dry & cure at 160 ̊C for 2min.

Notice:

  • Prepared solution should be used immediately and make sure the working liquid atapprox.25 – 40 ̊C. Please test before using.
  • Please clean up the alkali (pH less than 7), salt and soaping agent of the fabric beforeusing wet rubbing fastness improving agent ADILON INDIFIX.
  • Please clear away foaming or groove and change the working liquid because it will have a lot of foam when it use for a long time.
  • Maintain the pH of 5 – 6.
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Adinath makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Adinath products for its particular application. * Nothing included in this information waives any of Adinath general terms and conditions of sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change.
FAQS

Cutting-Edge Fashion & Textile Solutions

ADILON INDIFIX improves wet rubbing fastness for cellulosic and blended fabrics, providing a permanent solution without harmful chemicals.

Yes, ADILON INDIFIX can be used on denim and other fabrics, ensuring no negative effects on fabric aesthetics or hand feel.

ADILON INDIFIX can be applied through dipping, padding, or exhaust processes, with dosage rates ranging from 30–50 g/l depending on the process.

Yes, ADILON INDIFIX is free from formaldehyde, diethyl formamide, and other harmful chemicals, conforming to OEKO-TEX 100 standards.

Products

Related Products