ADILON SES

Add Your Heading Text Here

ADILON SES is a swelling, wetting penetrating agent developed especially for swelling of polyester and blends during drum washing. When twist of the fibre breaks, fibre swells grainy feel is achieved which gives fluffy and bouncy effect to the fabric.
Characteristics
Benefits
Good swelling agent

Gives excellent swelling effect to the fabric. Gives dana effect on polyester.

Good scouring & rewetting properties

It promotes the removal of hydrophobic impurities like oil, wax etc. and improve the absorbency of textile material and also retain absorbency after drying.

Reduce process time

It can be used in single bath scouring and bleaching thus save time of processing and also it can be used in single bath dyeing process.

Economical product

As it is also worked as scouring and rewetting agent it reduces the usage of additional scouring agent and stain remover.

Gives excellent hand feel

Provides fabric bulky and soft feel which cannot be achieved without swelling agent.

Properties:

CHEMICAL CONSTITUENTS

Synergetic preparation of special surfactants.

CHEMICAL NATURE

Non-Ionic.

COLOUR

Colourless clear to pale yellow viscous liquid.

pH. (as such)

7.5 +/- 1

DENSITY
Approx. 1.0 g/cm3
SOLUBILITY

Soluble in water.

COMPATIBILITY

Compatible with anionic and non-ionic products.

STORAGE STABILITY

ADILON SES is stable for 1 year when properly stored in closed containers at 20°C. The product is sensitive to temperatures below 0°C and above 40 °C.

STABILITY TO ALKALI

20 g/l NaoH 100 %

ECOLOGY AND TOXICITY

The usual hygiene and safety rules for handling chemicals should be observed in storage, handling and use. The product must not be swallowed.

Application:

For swelling on polyester & blends:

  • DRUM MACHINE
    0.40 – 0.75 % o.w.f. LIQUID CAUSTIC
    0.20 – 0.50 % o.w.f. ADILON EXR
    0.75 – 1.25 % o.w.f. ADILON SES
    Temp.: 125 – 130°C
    Time: 2 hours
  • JET MACHINE
    0.20 – 0.50 % o.w.f. LIQUID CAUSTIC
    0.20 – 0.50 % o.w.f. ADILON EXR
    0.50 – 1.00 % o.w.f. ADILON SES
    Temp.: 120 – 125°C
    Time: 30 Mins
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Adinath makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Adinath products for its particular application. * Nothing included in this information waives any of Adinath general terms and conditions of sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change.
Products

Related Products