ADILON CB-WET is a good wetting agent and detergent with very good rewetting action and extremely low foaming, for both continuous & discontinuous pre-treatment processes on cellulosic and their blends with synthetics.
It can be used in the following processes:
- Enzymatic De-sizing
- Discontinuous bleaching with hydrogen peroxide
- Alkaline Cracking of cellulosic and their blends
- Acid Cracking
- Washing of all kinds of fibres
Characteristics |
Benefits |
---|---|
Very good detergency and emulsifying power | Removes oily and greasy impurities as well as sizing and soil particles. Results in good hydrophillicity. Increases safety and reproducibility for subsequent processing stages. |
Good wetting properties | Smooth and trouble-free loading and running of goods. Ensures instant wetting. |
Good resistance to oxidative and reductive bleaching agents. Good stability to alkali and acids. Very good compatibility with enzymes. | All round application. Reduces storekeeping. |
Low foaming | High stability of product and application liquors. No risk of separation liquors. No risk of separation in machines with vigorous liquor circulation. Low foaming throughout processing. |
Liquid, pump able formulation. Miscible with water | Simple handling, suitable for automatic dispensing equipment. |
Properties:
CHEMICAL CONSTITUENTS
Synergetic preparation of special salt of a phosphoric acid ester.
CHEMICAL NATURE
Non-Ionic.
COLOUR
Colourless slight viscous liquid.
pH. (as such)
7 +/- 1
DENSITY
SOLUBILITY
Soluble in water.
STORAGE STABILITY
ADILON CB-WET is stable for 1 year when properly stored in closed containers at 20 °C. The product is sensitive to temperatures below O °C and above 40 °C.
STABILITY TO ALKALI
30g/l NaoH 100 %
ECOLOGY AND TOXICITY
The usual hygiene and safety rules for handling chemicals should be observed in storage, handling and use. The product must not be swallowed.
Application:
Dissolving / Diluting :
ADILON CB-WET can be added undiluted to the application baths. Feed baths should be stirred after prolonged standing. Suggested recipe examples:
- Discontinuous Peroxide Bleach:
– 0.5 – 03 g/l NaoH 100%
– 1.0 – 4.0 g/l ADILON CB-WET
– 0.4 – 02 ml/l ADILON SEQUASTAB
– 02 – 10 ml/l H2O2 50% - An addition of TEXBRITE products is required for full white:
– Liquor ratio: 4:1 – 20:01
– Temperature: 90 – 98°
– Reaction time: 20-60 min - Enzymatic De-sizing:
– 0.5 – 2.0 ml/l ADILON CB-WET
– 1.0 – 3.0 g/l PROZYME SIZE-X
– Liquor ratio: 4:1 – 20:01
– Temperature: 70 – 80°C
– Time: 30 – 60 min
– Hot rinsing - Acid Cracking:
– 1.0 – 4.0 ml/l ADILON CB-WET
– 0.5 – 2.0 ml/l ADILON NT
– Liquor ratio: 4:1 – 20:01
– Temperature: 30 – 50°C
– Time: 20 – 30 min
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Adinath makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Adinath products for its particular application. * Nothing included in this information waives any of Adinath general terms and conditions of sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change.
FAQS
Cutting-Edge Fashion & Textile Solutions
ADILON CB-WET provides excellent wetting properties, good detergency, and emulsifying power, making it effective for removing sizing and soil particles, and improving hydrophilicity in the continuous pre-treatment processes.
ADILON CB-WET can be used in enzymatic desizing, continuous & discontinuous bleaching with hydrogen peroxide, alkaline and acid cracking, and washing all kinds of fibers.
For continuous peroxide bleaching, 4-6 g/l of ADILON CB-WET is recommended, along with other specific chemicals based on the process requirements.